Mastic Adhesive is heavy duty mastic used to adhere to any of the Rust-Oleum Industrial Flooring FRP products.

Features and Benefits of Mastic Adhesive - Anti-slip Products:

Used to adhere Anti-Slip FRP Sheets, FRP Step Covers, FRP Landing Covers, Safety Edge FRP and Heavy Duty FRP Plates

Mastic Adhesive is ideal for use on brick, concrete, tile, wood, plaster, ceramic, vinyl, masonry, glass, aluminum and other metals

Helps prevent rocking on uneven surfaces

Available in a 10 oz. Caulking Tube

Surface Preparation: The desired substrate must be clean, dry and free of loose material. Make sure your surface is structurally sound.

Mixing: Apply Mastic Adhesive when temperatures are 50°F and above. For easier applications, keep Mastic Adhesive at above 50°F prior to use for at least 24 hours. Dry fit the FRP product before applying mastic adhesive. Cut the tip of the nozzle off, ¼" is recommended for most applications. Load the cartridge into a caulking gun and apply a continuous bead of material to the desired surface. For general purpose use, apply around the perimeter and “X” bead the surface. For longer surfaces, use a zigzag bead.

Coverage: As a guide, one 10 oz. tube of Mastic Adhesive is sufficient for:

Anti-slip FRP Sheets:
2 - 47" x 47" Anti-slip FRP sheets
1 - 47" x 96" Anti-slip FRP sheet

FRP Step Covers:
5 X 32" wide Step Covers
3 X 36" wide Step Covers
2 X 59" wide Step Covers


Safety Edge FRP: Approximately 39 feet of Safety Edge FRP

Heavy Duty FRP Plates: Approximately 30 feet of Heavy Duty FRP Plates